HobbyKing
TURNIGY HEAD LOCK & STANDARD GYRO (DIGITAL/ANALOG)
| Voltage used | 4.2 - 7V |
| Power consumption | Approx 33mA |
| Operation temp | -5C - 60C |
:, Small Size piezoelectric ceramic gyro, Dual Mode :, Head Lock and Standard,
Turnigy Piezo Head Lock & Standard Gyro. The TR302-AD is ...5 Reviews
HobbyKing
TZ-V2 .50 SIZE NITRO 3D HELICOPTER KIT
| Control System | 120° CCPM |
| Rotor Blade Length | 600mm |
| Length | 1247mm |
| Height | 355mm |
| Width | 231mm |
| Gear ratio | 8.5 |
| Pinion gear | 10T |
| Main gear | 85T |
| Main rotor diameter | 1345~1365mm |
| Tail rotor diameter | 242mm |
| Main rotor length | 600~620mm |
| Flying weight | Approx 3300g |
| Radio Gear | Gyro/Rx |
| Rx Battery | (UBEC with 2 Cell Lipoly) |
Type:, .50 size glow powered 3D Pro Helicopter,
An amazing quality kit, with excellent features and an advance ...5 Reviews
HobbyKing
18-11 2000KV MICRO BRUSHLESS OUTRUNNER (10G)
| Model | 1811-2000 |
| Weight | 10g (With wires and mount) |
| Suggested Prop | 7x5 |
| Suggested Power | 7.4v |
| No Load Current | .4a |
| Thrust | 130g / 5000rpm |
| 7.4v no-load speed | 15000rpm |
| Peak Eff Current | 5.5A |
| Shaft | 2mm |
| Diameter | 18mm |
| Length | 30mm (including mount & shaft) |
Kv: 2000rpm/v,
Micro sized motor. Tightly hand wound with thick guage copper. ...5 Reviews
HobbyKing
KB45-08L 2300KV BRUSHLESS INRUNNER
| Weight | 449g |
| Shaft | 6mm |
| Size | 63x45mm |
| Voltage | 36v |
| Highest rated power | 3439W |
Kv: 2300RPM,
KB45-08L 2300kv Brushless Inrunner This size motor will fit our ...5 Reviews
HobbyKing
MINI AIR COMPRESSOR. (1/8HP) 110V
| Type | Piston |
| Power | 1/8HP |
| Max Pressure | 2.8BAR/40PSI |
| Air Flow | 13-15L/Min |
| Dimension(L*W*H) | 18CM*11CM*14.5CM |
| weight | 2.4KGS |
Specifications:, Electric Current:, 0.65A/50HZ;1.4A/50HZ, Speed/Min:, 3400,110-120V,220V/60HZ,
Great for small workshops. Low noise and regulated posative airflow ...5 Reviews
HobbyKing
KB45-10L 1800KV BRUSHLESS INRUNNER
| Weight | 449g |
| Shaft | 6mm |
| Size | 63x45mm |
| Voltage | 36v |
| Highest rated power | 2808W |
Kv: 1800RPM/V,
KB45-10L 1800kv Brushless Inrunner This size motor will fit our ...5 Reviews
HobbyKing
FRSKY V8FR-II 2.4GHZ 8CH RECEIVER (HV)
| Operating voltage | 3.0~16V(HV Version) |
| Power consumption | 30mA |
| Resolution | 3072 |
| Latency | 22ms |
| Range | 1.5km-2.5km |
| Dimensions | 44 x 24 x 14 mm |
| Weight | 9.3g |
Features:, Advanced Continuous Channel Shifting Technology (ACCSTis our advanced tecnology it shifts channel hundred times per second and there is no signal conflicts and interruptions) robust frequency agility., Receiver Specification:, Number of channels: 8,
FrSKY ACCST technology is proven, approved by many model associations, ...5 Reviews
HobbyKing
HK2836 EDF OUTRUNNER 3800KV FOR 64MM
| Specs | Kv- |
| Dimensions | 75 x 28mm |
| Shaft diameter | 3.0mm |
| Shaft length | 10mm |
| Voltage | 14.8V |
| Weight | 97g |
| Output Power | 520w |
| Max current(<60s) | 35A |
| RPM/V | 3800 |
| Thrust | 1100g(38.8oz.) |
| Recommended model weight | 600-800g |
| Recommended model fans | 64mm Fans |
| Mounting Hole Bolt Circle | 18mm |
| Mtg. Hole Number & Size | 4 x M2 |
5 Reviews
HobbyKing
FUTABA 6EX 2.4GHZ FAAST RADIO SYSTEM W/R617FS RECEIVER (MODE 2)
| Specifications | Transmitter; |
| Power Supply | 9.6V |
| Current Drain | 170mA |
| Size | 1.6 x 1.1 x .35" (40 x 27 x 9mm) |
| Power Requirement | 4.8 - 6V |
| Current Drain | 80mA (at no signal) |
Programming Features:, Trainer function-transmitter can be master or student, compatible with other Futaba systems, Weight: 7g, Includes:, Futaba 6EX Transmitter,
Six model memory Servo reversing End point adjustment Airplane or ...5 Reviews
HobbyKing
TURNIGY NANO-TECH 1800MAH 4S 35~70C LIPO PACK
More than just a fancy name. TURNIGY nano-tech lithium polymer batteries are built with an LiCo nano-technology substrate complex greatly improving power transfer making the oxidation/reduction reaction more efficient, this helps electrons pass more freely from anode to cathode with less internal impedance.In short; less voltage sag and a higher discharge rate than a similar density lithium polymer (non nano-tech) battery.For those that love graphs, it means a straighter, longer curve. For pilots it spells stronger throttle punches and unreal straight-up performance. Excellent news for 3D pilots! Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance!Spec.Capacity: 1800mAhVoltage: 4S1P / 4 Cell / 14.8VDischarge: 35C Constant / 70C BurstWeight: 207g (including wire, plug & case)Dimensions: 103x35x29mmBalance Plug: JST-XHDischarge Plug: XT60 ConnectorSuited to the following models: RAVE450 * The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. 1) The nanometer conductive additives form ultrastrong electron-conducting networks in the electrodes which can increase electronic conductivity. 2) These additives create a superstrong ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.Advantages over traditional Lipo batteries;-Power density reaches 7.5 kw/kg.-Less Voltage sag during high rate discharge, giving more power under load.-Internal impedance can reach as low as 1.2mΩ compared to that of 3mΩ of a standard Lipoly.-Greater thermal control, pack usually doesnt exceed 60degC-Thickness swelling during heavy load doesnt exceed 5%, compared to 15% of a normal Lipoly during heavy load.-Higher capacity during heavy discharge. ,
5 Reviews
HobbyKing
MS COMPOSIT NIGHT BLADE CHARGER
| Power source | 12 - 20 V |
| Charging time | 1 - 3 hour |
5 Reviews
HobbyKing
NTM PROP DRIVE SERIES 35-36A 910KV / 350W
| Model | NTM Prop Drive 35-36A 910 |
| Turns | 10T |
| Max current | 38A |
| Rated Power | 350w |
| Shaft | 4mm |
| Weight | 117g |
| Bolt holes | 18.9mm & 25mm |
| ESC | 30A |
| Cell count | 3S Lipoly |
| Suggested Prop | 10x4 |
| Efficiency | 83% |
Kv: 910rpm/v, Bolt thread: M3,
NTM Prop Drive motors are rock-solid performance outrunners with tight ...5 Reviews
HobbyKing
EDF DUCTED FAN UNIT 7 BLADE 3INCH
| Blade Diameter | 3inch / 77mm |
| Outer Case Diameter | 83mm |
| Wall Thickness | 1.9mm |
| EDF Length | 86mm |
| Shaft Size | 3.175mm |
| ESC | 35A |
| Rpm | 3,900kv |
| Power | 500~2000g Thrust |
Blade Type:7, Recomended Motor:, 28-35 8 Turn (11.1~18.5v),
EDF Ducted Fan Unit 7 Blade 3inch This EDF will ...5 Reviews
HobbyKing
C2024 MICRO BRUSHLESS OUTRUNNER 1600KV (17G)
| Diameter | 20.2mm |
| Length | 24mm |
| Shaft | 5mm |
| Weight | 17g (with 10cm wire) |
| Power | 80W |
| Resistance | 533 |
| Idle Current | .2A |
| Max amp | 10A (15sec burst) |
| Voltage | 2-4cell Lipoly |
Kv: 1600rpm/v, Turns: 25,
Specifications. We do not have a suggested prop size for ...5 Reviews
HobbyKing
TURNIGY 2632 BRUSHLESS MOTOR 3400KV
| Diameter of shaft | 2.3mm |
| Length of front shaft | 12.7mm |
| Magnet type | 45SH |
| Voltage | 2-3S |
| Prop | APC4.1x4.5 |
| Thrust | 465g |
| Power | 350W |
Dimension:, 33mm x 26mm, 46mm(with shaft), Weight:, 51g (kv3400) (not including connectors), Lamination thickness: .,
2mm Max performance For 500~800g model airplane & 400 size ...5 Reviews